eebanner-large

For Symbian

  • Installation for Symbian +

    Before installing EagleEyes to your mobile phone for remote surveillance, make sure you have checked the following:

    1 Your mobile platform is Symbian.  

    2 Mobile Internet services are subscribed and available to use for your mobile phone.

    Note: You might be charged for Internet access via wireless or 3G networks. For the Internet access rate details, please check with your

    local network operator or service provider.

    3 Your DVR or network camera is powered on and connected to Internet.

    4 You have noted down the IP address, port number, user name and password used to access your DVR or network camera from Internet.

    Step 1: Connect to http://www.eagleeyescctv.com from your mobile phone, and sign in.

    Note: Please DO NOT try to download EagleEyes from your computer.

    Step 2: Select the download link from the website to start downloading.

    Step 3: When the download is completed, EagleEyes will be installed automatically to the location where all applications are saved in your phone

    by default, or where you specify. 

  • Setup for Symbian +

    Note: The screen shots below are taken from Nokia N97 as an operation example and may look different from the ones you have.

    Step 1:
    Browse to where EagleEyes is installed by default on your mobile phone when the installation is completed. Taking Nokia N97 as an example, go to the main menu, and select “Applications”.

    Step 2: Then, find  EagleEyes installation V1 (EagleEyes), and select to enter the address book of EagleEyes.

    Step 3: Press “Options” to show the available options. Select “Add” to add new device connection.

    Step 4: Fill in the information needed to access the device you want to add. Then, press “OK” to save and return to the address book.

    symbian1 symbian2

    Step 5: Select the item you just added to log into the device immediately.

    Note: If you fail to get the correct device type, there might be some connection problems.
  • 1

For Windows Mobile

  • Installation for Windows Mobile +

    Before installing EagleEyes to your mobile phone for remote surveillance, make sure you have checked the following:

    1 Your mobile platform is Windows Mobile.

    2 Mobile Internet services are subscribed and available to use for your mobile phone.

    Note: You might be charged for Internet access via wireless or 3G networks. For the Internet access rate details, please check with your

    local
    network operator or service provider.

    3 Your DVR or network camera is powered on and connected to Internet.

    4 You have noted down the IP address, port number, user name and password used to access your DVR or network camera from Internet.

    Step 1: Connect to http://www.eagleeyescctv.com from your mobile phone, and sign in.

    Note: Please DO NOT try to download EagleEyes from your computer.

    Step 2:
    Select the download link from the website to start downloading.

    Step 3: When the download is completed, EagleEyes will be installed automatically to the location where all applications are saved in your phone

    by default, or where you specify.






  • Setup for Windows Mobile +

    Note: The screen shots below are taken from HTC TyTN II as an operation example and may look different from the ones you have.

    Step 1:
    Browse to where EagleEyes is installed by default on your mobile phone when the installation is completed. Taking HTC TyTN II as an example, select “Start”  “Programs”.

    Step 2: Then, find  EagleEyes installation V1 (EagleEyes), and select to enter the address book of EagleEyes.

    Step 3: Press “NEW DEVICE” to add new device connection.

    windows1  windows2

    Step 4: Fill in the information needed to access the device you want to add. Then, press “Apply” to save and return to the address book, or “Login” to directly log into the device.

    windoes3  windows4

    Note: You can also select the device you just added to log in the address book. If you fail to get the correct device type, there might be some connection problems.
  • 1

For BlackBerry

  • Installation for Blackberry +


    Before installing EagleEyes to your mobile phone for remote surveillance, make sure you have checked the following:

    1 Your mobile platform is BlackBerry.
     
    2 Mobile Internet services are subscribed and available to use for your mobile phone.

    Note: You might be charged for Internet access via wireless or 3G networks. For the Internet access rate details, please check with your

    local network operator or service provider.

    3 Your DVR or network camera is powered on and connected to Internet.

    4 You have noted down the IP address, port number, user name and password used to access your DVR or network camera from Internet.

    Step 1: Connect to http://www.eagleeyescctv.com from your mobile phone, and sign in.

    Note: Please DO NOT try to download EagleEyes from your computer.

    Step 2: Select the download link from the website to start downloading.

    Note: It’s recommended to download EagleEyes for BlackBerry with the web browser of Opera.

    Step 3: When the download is completed, EagleEyes will be installed automatically to the location where all applications are saved in your phone

    by default, or where you specify.

  • Setup for Blackberry +

    Note: The screen shots below are taken from BlackBerry Bold 9000 as an operation example and may look different from the ones you have.

    Step 1:
    Browse to where EagleEyes is installed by default on your mobile phone when the installation is completed. Taking BlackBerry Bold 9000 as an example, press “black”, and select “Downloads”.

    Step 2: Then, find EagleEyes installation V1 (EagleEyes), and select to enter the address book of EagleEyes.

    black 1 black 2

    Step 3: Press the menu key (black) to show the available options. Select “Add” to add new device connection.

    Step 4: Fill in the information needed to access the device you want to add. Then, press the menu key again, and select “OK” to save and return to the address book.

    black 3 black 4

    Step 5: Select the item you just added to log into the device immediately.

    Note: If you fail to get the correct device type, there might be some connection problems.
  • APN Settings for Blackberry +

    Note: Take “Blackberry Bold 9000” as an example.

    Step 1:
    Click “Option”, and select “Advanced Option” and then “TCP/IP”.

    APN 1  APN 2  APN 3

    Step 2: As you are in the TCP/IP page, turn on APN. Then, enter the name, gateway and the port of your mobile service provider if it is needed.

    APN 4

    To learn more about APN setting for different service providers in different countries, please check with your mobile service provider, or one of the following websites:

    http://forums.pinstack.com/f24/tcp_apn_wap_gateway_port_carrier_settings-360/

    APN 5
    http://www.webmessenger.com/support/APN.jsp

    APN 6



  • 1

For Android

  • Installation for Android +

    Before installing EagleEyes to your mobile phone for remote surveillance, make sure you have checked the following:

    1 Your mobile platform is Android.

    2 Mobile Internet services are subscribed and available to use for your mobile phone.

    Note: You might be charged for Internet access via wireless or 3G networks. For the Internet access rate details, please check with your

    local
    network operator or service provider.

    3 Your DVR or network camera is powered on and connected to Internet.

    4 You have noted down the IP address, port number, user name and password used to access your DVR or network camera from Internet.

    Step 1:  Connect to http://www.eagleeyescctv.com from your mobile phone, and sign in.

    Note: Please DO NOT try to download EagleEyes from your computer.

    Step 2:  Select “Software” and the mobile platform of your phone to download EagleEyes to your phone. Two versions of EagleEyes are available:

    EagleEyes Lite+, and EagleEyes Lite.

    Step 3: Select the version you want, and start downloading the application.

    Note:  For Push Notification to work properly, your DVR must support Push Notification, the platform version of your Android mobile phone must

    be Android 2.2 or later, and you need to install “Eagleeyes Lite+”.

    Step 4: When the download is completed, EagleEyes will be installed automatically to the location where all applications are saved in your phone

    by default, or where you specify.





  • Setup for Android +

    Note: The screen shots below are taken from HTC Desire as an operation example and may look different from the ones you have. 

    Step 1: Browse to where EagleEyes is installed by default on your mobile phone when the installation is completed.

    Step 2: Then, find  EagleEyes installation V1 and activate it.

    Step 3: Select “+” on the screen to add a new device. Then, enter the information needed to access your device, such as the IP address, user name, password, and port number. Select “OK” to confirm and return to the main screen of EagleEyes.

    Android1  Android 2

    Step 4: Select the preview picture to enter the surveillance channel.

    Note: If you fail to see the preview of your device, there might be some connection problems.
  • 1

For iOS

  • Installation for iOS +

    Before installing EagleEyes to your mobile phone for remote surveillance, make sure you have checked the following:

    1 Mobile Internet services are subscribed and available to use for your mobile phone.

    2 Your mobile platform is iOS.

    Note: You might be charged for Internet access via wireless or 3G networks. For the Internet access rate details, please check with your local

    network operator or service provider.

    3 Your DVR or network camera is powered on and connected to Internet.

    4 You have noted down the IP address, port number, user name and password used to access your DVR or network camera from Internet.

    Step 1: Connect to http://www.eagleeyescctv.com from your mobile phone, and sign in.

    Note: Please DO NOT try to download EagleEyes from your computer.

    Step 2:  
    select “Product" -> Software” -> "EagleEyes APP",  and select "iOS", and find the version suitable for your iOS device.

    Step 3:  Select the version you want, and you’ll be directed to “App Store” to download the application.

    Note: You can also find EagleEyes on “App Store” from your iOS device. Go to “App Store”, and select “Search”. Enter the keyword “eagleeyes” to find and download the version you want.

    Step 4:  When the download is completed, EagleEyes will be installed automatically to the location where all applications are saved in your phone by default, or where you specify.
  • Setup for iOS +

    Step 1:  Find EagleEyes installation V1 (EagleEyes Lite) or EagleEyes plus (EagleEyes Plus) on the desktop of your iOS device depending on which version you’ve installed, and select to enter the address book of EagleEyes.

    Note: The screen shots shown below are from EagleEyes Plus, and may look different from other versions of EagleEyes.

    Step 2:
    In the address book, select add button at the bottom to add new device connection, and select “Get Type” to check if you can get the correct device type.

    Note: If you fail to get the correct device type, there might be some connection problems.

    Step 3:
    Then, select “Save” to save your settings and return to the address book. You’ll see the icon representing the device you want to connect: (A) 16 CH DVR (B) 8 CH DVR (C) 4 CH DVR (D) PTZ IPCAM (E) Normal IPCAM (F) Unknown

    save             address

    Step 4: Select the item you just added to log into the device immediately.

  • Version Support List for iPhone +

    Two versions of EagleEyes are designed for iPhone: One is free (EagleEyes Lite), and the other is charged with $4.99 (EagleEyes Plus). To know the differences between these two versions, please refer to the table below, and select the one you need to

    download.

     

    Lite
    EagleEyes installation V1
    Plus
    EagleEyes plus
    Address Book 4

    200

    Time search and playback

    N

    Y

    Auto playback after an event alarm is   triggered*

    Y

    Y

    People counting*

    Y

    Y

    Smart zoom control

    Y

    Y

    IR on / off control

    Y

    Y

    PTZ auto tracking control

    Y

    Y

    PTZ preset point setting

    Y

    Y

    Real time video streaming

    Y

    Y

    Real time audio streaming

    Y

    Y

    Video quality control

    Y

    Y

    Auto re-login after disconnected

    Y

    Y

    Push Notification*

    Y

    Y

    PTZ Hot Point control

    Y

    Y

    Touch to zoom in / out in PTZ mode

    Y

    Y

    Double-click to zoom max. in PTZ mode

    Y

    Y


    * These functions are for IVS DVR models only.
  • 1

Disclaimer

  • Mac®, iPhone® and iPad® are the registered trademark of Apple Inc.
  • BlackBerry® and related trademarks, names and logos are the property of Research In Motion Limited and are registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion Limited.
  • Android™ is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.
  • Windows® and Windows® Mobile are either the trademarks or registered trademarks of Microsoft Corporation in the United States and/or other coutries.
  • Symbian™ is the trademark of Symbian Software Ltd.

Please Login